Umbrecht, Florian:
ISBN 9783862470433

Wireless implantable passive strain sensor for strain monitoring of orthopedic implants. Scientific Reports on Micro and Nanosystems Vol. 9 # Pb., Großformat (24 x 17), 222 S., 93 Abb., 31 Tab.

SCHLAGWORTE:
Dehnungssensor
strain sensor
implantierbar
Implantatimplantable
kabellos
wireless
passiv
passive

This work presents a new passive sensor concept for monitoring the deformation of orthopedic implants. The novel sensing principle of the WIPSS (wireless implantable passive strain sensor) is based on a hydro mechanical amplification effect. The WIPSS is entirely made from biocompatible PMMA and consists of a microchannel attached to a reservoir, which is filled with an incompressible fluid. As the reservoir is exposed to strain, its volume changes and consequently the fill level inside the microchannel varies. The wireless detection of the microchannel's strain-dependent fill level is based on ultrasound. The WIPSS' sensing principle is proofed by finite element simulations and the reservoir's design is optimized towards maximum volume change, in order to achieve high sensitivity. A fabrication process for WIPSS sensor devices entirely made from PMMA is presented. The obtained measurement results confirmed the sensor's functionality, and showed very good agreement with the obtained results of the conducted FE simulations regarding the sensor's sensitivity. A strain resolution of 1.7 ± 0.2 x 10-5 was achieved. Further, the determination of the cross sensitivity to temperature and strains applied out of the sensing direction is presented. The response to dynamic inputs (0.1 Hz to 5 Hz) has been measured and showed decreasing sensor output with increasing frequency. Test structures of the sensor device allow the application of a signal bandwidth up to 1 Hz. Therefore, the proposed sensor concept of the WIPSS presents a promising new sensor system for static in-vivo strain monitoring of orthopedic implants. In combination with the developed ultrasound based read-out method, this new sensor system offers the potential of wireless sensor read-out with medical ultrasound scanners, which are commercially available.

	^